This utility boots from micro SD and exposes the internal eMMC flash storage when the PinePhone is connected to a computer. The internal eMMC flash storage can be flashed using the Jumpdrive utility by Danct12 and Martijn from postmarketOS. On the PinePhone Pro: The eMMC might have to be disconnected to boot from the microSD card, see PinePhone Pro#Boot order.Plug microSD card into phone (make sure to use the top slot, not the bottom slot).Write the image to your microSD card, see below.Download your chosen image from PinePhone Software Releases for the regular PinePhone and PinePhone Pro Software Releases for the PinePhone Pro.See reuse SD card on how to format the microSD card properly, including wiping the residues of u-boot. The phone will also try to boot from microSD cards, which were previously flashed with an OS and formatted later, causing the phone to fail to boot. Note: Booting from USB is not supported by the hardware, a live USB stick will not boot. It is not possible to lock themself out of the phone when the installation on the internal storage (the eMMC) fails, as a correctly flashed microSD card will always boot. It is therefore recommended to have a microSD card handy. The PinePhone always boots from the microSD card first. 5 Reuse SD card for data storage on system booting from eMMCįor details regarding the boot priority on the PinePhone Pro see PinePhone Pro#Boot order.4.1 Resize SD card's partition using computer.

Zero install wiki